Blog Categories
Tags
boiler
Broken Pipe
clogs
cooling
efficiency
energy efficiency
energy savings
energy saving tips
energystar
Energy Star Program
Frozen Pipes
furance
furnace filter
Heating
Heating system
hot water
indoor air quality
leaks
maintenance
Plumbing
prevention
radiant
radiant heat
repair
sump pump
Tankless Water Heaters
Tax Credits
tips
water heater
Water Heaters
Friday, 06 April 2012 10:56
Extending the Lifespan Of Your Home Water Heater With Regular Maintenance
Written by Lindsey MorrowExtending the Lifespan Of Your Home Water Heater With Regular Maintenance
Traditional Tank-Style Water Heater Maintenance
Traditional tank-style water heaters should last for many years. However, over time sediment and rust can accumulate, reducing the operating efficiency and shortening the lifespan of your water heater.To keep your conventional water heater working reliably and lasting longer, follow these regular maintenance steps at least once a year:
- Drain the water heater tank annually to remove sediment and rust buildup. This is particularly important if you have hard water. Attach a garden hose to the drain valve at the bottom of the tank. Ensure the opposite end of the hose is placed outside, in a sink or near a floor drain. Be careful, as the water can be extremely hot and cause burns. If you are not sure of how to flush your water heater, call Grand Lake Plumbingm. We'll advise you on the best way to drain your particular hot water heater.
- Inspect the outside of the tank for leaks and rust.
- For gas water heaters, check the exhaust flue to make ensure that air is escaping outside by striking a match near to the bell housing. The smoke should exit out the flue.
- Check the relief valve by placing a bucket underneath the extension pipe and turning the valve to the open position. Water should flow freely when the valve is opened.
- Make sure the thermostat is set to between 120 and 125 degrees Fahrenheit. We recommend not setting the water temperature above 120 degrees Fahrenheit if you have have young children.
- Always keep a pan under the water heater tank to make it easier to spot leaks.
- If you have a gas water heater, check the pilot light flame to ensure it is burning blue and steady.
Tankless Water Heater Maintenance
Tankless water heaters offer an energy saving alternative to conventional tank-style water heaters with the water only getting heated when it's needed. Because there is no storage tank to heat, you'll never run out of hot water as long as the unit is been properly sized for your hot water needs.Like traditional water heaters, tankless water heaters need to be maintained properly to operate at peak efficiency and to realize their cost savings over conventional water heaters. So, spending some time on maintenance yourself — or calling Grand Lake Plumbing for regular maintenance — will ensure that you are taking advantage of all the benefits of your tankless water heater.
1. Check and Clean the Screen Filter
Periodically inspect and clean the filter located on the water inlet side of your tankless water heater. It's best to have a licensed plumber do this job. If you're a do-it-yourselfer, please learn the correct procedure before attempting this task. Never use chemical solutions to clean your water heater, since it will enter your drinking water. Vinegar is a safe, effective cleaner.
2. Flush the System
To prevent the a harmful buildup of lime and scale, flush your tankless water heater periodically. Grand Lake Plumbing can help you flush your water heater. As noted above, please be sure to flush it with vinegar and not chemicals that could contaminate your water supply.
Read 797 times
Published in
Plumbing Tips
Latest from Lindsey Morrow
Login to post comments
Grand Lake Plumbing & Heating Blog
-
Identifying Plumbing Issues Before They Become Major Problems
Written by AdministratorIdentifying Plumbing Issues Before They Become Major Problems
Many plumbing issues around the home will have symptoms that show up before major problems occur. By addressing these symptoms before they become larger, you can often prevent damage and expensive repairs.
Here are some of the more common plumbing problems that can cause significant damage if left uncorrected.
Water Leaks - An undetected water leak or drip can cause hidden mold and rot problems. Enclosed spaces like crawl spaces should be inspected for water spots or mold, which can indicate a leak. Check the area under sinks and vanities for water stains.
Screeching Faucets - This could indicate that the air "bleed-off" system is not working right.
Low Water Pressure - This can be caused by a clog, leak, or a pipe that is too narrow for a particular application.
Rattling Pipes - This can indicate air is trapped in the pipes.
Backed Up Toilet - This may indicate a damaged or clogged sewer line.
Water Heater Rust - If you see brown water coming out of your faucets, your water heater may be corroded.
If you experience any of these symptoms, call Grand Lake Plumbing. Our expert plumbers can help identify the small problems before they cause expensive damage. From fixing leaking pipes to sewer line inspections, no job is too big or too small.
Written on Tuesday, 07 May 2013 08:51 in Plumbing Tips Be the first to comment! Read 44 times
Committed To Exceptional Customer Service
|
|
Communities We Serve
| Craig CO 81625 81626 Fraser CO 80442 Grand Lake CO 80447 Granby CO 80446 Hayden CO 81639 Hot Sulphur Springs CO 80451 | Kremmling CO 80459 Oak Creek CO 80467 Parshall CO 80468 Steamboat Springs CO 80477 80487 80488 Tabernash CO 80478 Winter Park CO 80482 | Yampa CO 80483 And Many More Communities In Western Colorado |







